D L Energy Concern Pvt. Ltd. is a service oriented consultancy/installation company which has been established and managed by young and enthusiastic professionals having expertise on the field of Renewable Energy Technology. It is established in 2008 AD and legally registered in 2009 AD under the Company Act of Nepal.
The company is dedicated and committed to provide the quality services to its client on time with professionally manner.
Since it’s established the company is undertaken the activities related to the feasibility study, design, estimate & installation of Improved Water Mill (locally known as Panighatta), Pico/Micro hydropower projects; quality monitoring of the installed technologies, preparation of the reports, manuals, conduction of the training, project management, socio-economic study, environment impact assessment, research & development and promotion activities for Renewable Energy Technologies etc.
D L Energy Concern Pvt. Ltd is pre-qualified company for carrying out the installation of micro hydropower project from Alternative Energy Promotion Center (AEPC).
Likewise, D L Energy Concern Pvt. Ltd. is pre-qualified as a consultant for quality verification purpose of Improved Water Mill Programme implemented by Centre for Rural Technology, Nepal (CRT/N) and supported by Alternative Energy Promotion Center (AEPC) & Netherlands Development Organisation, Nepal (SNV/N).
Pingback: D L Energy Concern Pvt. Ltd. | D L Energy Concern Pvt. Ltd
August 2, 2010 at 2:46 pm
Hi there,
I need your help to design pico hydro turbine which use water hammer effect to increase efficiency.
August 3, 2010 at 9:43 am
Okey, of course. What type (Impulse or reaction) and capacity (in kW) of Pico hydro turbine you wish to design ?
August 3, 2010 at 12:19 pm
Thanks,
I want to combine hydro ram pump and turbine like these:
1. Connect the exit valve of a hydro ram pump to the nozzle of turbine. Assume we have Fall : Drive ratio as 1:5 that required to generate the water hammer effect.
2. Connect the delivery of the ram pump to another nozzle of turbine.
By that, we get extra power created by the hammer effect to increase the turbine power.
Hope you can catch what i meant.
August 5, 2010 at 6:39 am
How is it getting on?
Any progress?
August 5, 2010 at 12:16 pm
I think you are going to design the pico hydro turbine for increase the efficiency of ram pump. In Nepal, we generally design the pico hydro turbine to generate the electricity connecting with generator.
To design the pico hydro turbine, the water discharge (liter per second) and water pressure (Water falls from the certain vertical head through the penstock pipe { in your case water pressure from the outlet of ram pump}) should be known. The size and type of the turbine depends up on this two data. If you provide me this data, I will help you to design the turbine.
If the pressure of the water in to turbine from nozzle is minimum, the efficiency of the turbine is low.
August 5, 2010 at 2:01 pm
We can start with the smallest turbine that has double nozzles.
Like as
Use the ram pump drive pipe which has the same size with the turbine penstock.
August 5, 2010 at 5:58 pm
Thanks to share your plan in brief. We can design that type of double jet small turbine for ram pump which creates the Water Hammer Effect and certain lifting head may be increased. We can design small turbine for testing as you think.
August 5, 2010 at 7:29 pm
Thank you very much.
I’m so happy that you could understand what is in my mind.
How long it will take time, if you could just give estimate?
We at the http://SolarPanelTalk.com forum are curious to know.
Looking forwad to hear from you soon.
August 6, 2010 at 2:49 pm
It takes near about two months to design and manufacture the pico turbine. We have not test this type of double jet turbine in Ram pump as you think till date. As you stated above, this is small testing unit…the performance result comes after the testing. Please share what kind of support do you want ( design only or manufacture & supply of small pico turbine) from us. I visited your site solarpowerindonesia.com. You have done more in Solar and wind power. We are focusing in Pico & Micro hydro power but not limited to this. Hoping to share knowledge and ideas… each other..
August 6, 2010 at 5:01 pm
I don’t have any company yet, so I come to you just with my idea to produce more efficient turbines.
It’s fully upto you what kind of share we could have in future.
August 7, 2010 at 1:35 pm
You haven’t any company yet? There may be coincident. There is TenagaSurya Center in a Nusa Dua, Bali , Indonesia. so, I am confused. What is your current location?
Okey, no problem, we have been manufacturing the pico hydro turbine to generate 3 kW power. We will discuss in your ideas in our technical team. I will share you if any progress on it. You may also mail me:
lamichhanebr@gmail.com.
Thanks
August 7, 2010 at 5:47 pm
You’re right, it’s coincident. Tenaga = power, Surya = sun.
I’ll keep on in touch by email.
We could let this conversation inspiring your visitors.
Hopefully we could come into a mutual join operation.
Thank you very much.