TenagaSurya

12V Smart Switch

Posted in Charger by TenagaSurya on April 20, 2011



12V Smart Switch

For 12 Volt Systems

The 12V Smart Switch is an adjustable LVD (Low Voltage Disconnect) that includes on/off and over-ride features. The 12V Smart Switch is the perfect way to protect your battery investment from a destructive over-discharge condition. The 12V Smart Switch will constantly monitor your battery and disconnect the attached DC load(s) if voltage drops below an unsafe level. The 12V Smart Switch will directly switch up to a 40 Amp load and can easily be configured to switch much higher loads with the addition of relays or solenoids (sold separately). The 12V Smart Switch also has a handy low voltage signal output that can be used to switch on a light or buzzer to notify you of the low voltage condition or could switch on a battery charger so that the batteries do not sit discharged for extended periods if unattended (light, buzzer, and battery charger not included). The 12V Smart Switch is epoxy encapsulated and ready for marine or tropical environments.

Factory Set Disconnect Voltage is 10.5 Volts
Factory Set Reconnect Voltage is 11 Volts

Voltage must remain below disconnect threshold for at least 5 seconds before disconnect will occur.
Voltage must remain above reconnect threshold for at least 5 seconds before reconnect will occur.

SOURCE: http://www.powerplanted.com/12vss.html

One Response

Subscribe to comments with RSS.

  1. TenagaSurya said, on April 20, 2011 at 10:36 am

    Reserved for discussion link.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: