TenagaSurya

Iota 12 V 90 A Converter/Charger # Iota1290

Posted in Charger by TenagaSurya on April 20, 2011

asSalaamu’alaykum.

Iota 12 V 90 A Converter/Charger # Iota1290
BatteryStuff Part #: IOTA-DLS1290
90 amps of clean reliable battery charging power!
Requires 20 amp AC circuit.

Iota 12 V 90 A Converter/Charger # Iota1290

Product Description

Using state-of-the-art switch-mode technology the DLS Power Supply series is engineered with the user and variable environmental conditions in mind. Extra care has been given to insure many years of service-free operation, even when subjected to extremely harsh conditions. Batteries are charged quickly and efficiently without over charging. Pumps, motors, and fans operate perfectly for prolonged life.

IOTA Engineering uses advanced switch mode technology to bring to market highly sophisticated electronic converter/power supplies at appealing affordability.

Exceptionally clean DC output insures pumps, motors, fans, and lights work perfectly. This means longer life for any connected load and virtually no AC ripple to cause static or premature failure of radio or television equipment.

The DLS series converter/charger quickly and efficiently charges batteries from the full rated output of the DLS. The DLS then maintains the batteries, only putting into the battery what is required by load or self-discharge, cutting back to milliamps as the battery requires.

Low and transient AC line voltage is a major cause of converter/power supply failure. The DLS series converter/power supply is protected against low line voltage, as well as spikes coming from the AC power source or from improperly adjusted generators.

The DLS series converter/power supply meets F.C.C. criteria, minimizing radio and television equipment interference, especially on the lower frequency bands.

The DLS series converter/power supply can be used with or without a battery. When used as a converter/power supply, the DLS model will only supply what the load requires. When not in use it is essentially off, reducing electricity usage.

Even in its subcompact size, the DLS series converter/power supply, at full load, has an operating temperature half that of some switch mode electronic models. This means substantially longer life and safer operation.

Tight line-load regulation ensures that the output voltage holds steady from no load to full load. This keeps pumps, motors, and lights working at the correct voltage even during brown out situations.

Proportional Fan Circuitry provides an extra measure of protection. During times of heavy load demands, the automatic circuitry will activate the fan before thermal stress can occur on any internal components. Reliability and durability is built into all DLS models.

In the event the batteries or the DLS unit is wired incorrectly, the DLS converter/power supply is protected from damage. External fuses can be quickly and easily replaced.

Iota DLS can be used without a battery as a straight Power Supply. Exceptional good unit for RV, remote camping sites, recharge of large DC powered audio systems and where generator power is used to power the charger. # IOTA1290

Features
Made in the United States
Iota Engineering DLS Converter/Chargers Iota Engineering’s DSL series converter/charger quickly and efficiently charges batteries from the full rated output of the DLS. The DLS then maintains the batteries, only putting into the battery what is required by load or self-discharge, cutting back to milliamps as the battery requires. Exceptional clean DC power, input ranges 96–140 VAC 47–63 Hz. All models ship with IQ Smart 3 Stage Charge Controller.
Optimal 3 Step Charging
Built-in Mode Indicators
Demand Sensing
Reverse Polarity Protection
Over Voltage Protected
Short Circuit Protection
Overload Protection
Line Regulation
Load Regulation
Fan Control
Thermal Protection
2 Year Warranty

Technical Specifications
Length 10
Width 6.5
Height 3.5
Weight 7.8
Shipping Weight (lb.) 10
Output Amperage, Max Continuous 90 A
DC Output Voltage (No Load) approx. 13.6 V
DC Output Voltage (Full Load) approx. 13. V
Output Voltage Tolerance (No Load) +/- 0.7%
Absorption Voltage 14.16 V
Maximum AC Current @ 108 VAC 21 A
AC Input Volts 115 V
AC Input Volts Freq. 47 – 63 Hz
AC Input Volts Range 108-132 V
Charge Voltage 14.76 V
Float Current Variable
Float Voltage 13.56 V
Typical Efficiency 80%
Maximum Power Output, Continuous 1210 W
Maximum Input Current 21 A
Working Temperature 0 ° to +40 °C
Storage Temperature -20 ° to +80 °C
Over Temperature Off at 80 °C
Ripple and Noise 50 mV RMS
Enclosure Aluminum Case
Output Banks 1
Manufacturer: Iota
Made In: United States

Smart Charging Technology!
Each charger will individually charge your batteries, with smart microprocessor controlled outputs. You will never need to worry about overcharging your battery with an Iota charger. The Iota DLS line of chargers produce less than half of the temperature created by like rated units that use switch mode electronics. This leads to longer life, and much safer operation. If you need more information about sizing your application, please check out our tutorials how batteries work, and our battery chargers tutorial for answers.

SOURCE: http://www.batterystuff.com/battery-chargers/brands/iota/IOTA-DLS1290.html

One Response

Subscribe to comments with RSS.

  1. TenagaSurya said, on April 20, 2011 at 2:01 pm

    Reserved for Forum discussion link.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: